We Make Everything Better

The COBRA PLUG-IN GPR uses real time Sampling of the radar signal. The Real time sampling allows for 32,000 stacks/second resulting in an amazing 45 dB increased signal-to- noise ratio.

Has similar features to our COBRA unit , however, while the COBRA has low resolution , it has high depth penetration.

The CBD has a high resolution and low depth penetration . Both GPRs are best used on our Vanguard UAV.

The Epsilon 140Z G2 is a solution for numerous types of missions where superior image stabilization, leading LWIR performance and long-range imaging is required in a small payload capacity.

LWIR: < 30 mK or 50mK sensitivity sensor with F1.2 15-75mm 5x optical zoom IR lens

State of the art multi-mission EO/MWIR surveillance system Epsilon 180. Combining a global shutter EO sensor with 4K QFHD video featuring 90x super resolution zoom and cooled MWIR sensor with 15x optical zoom for super long-range tracking.

The FLIR Duo Pro R is an aerial thermal camera designed for industrial, commercial and public safety applications. With the ability to select either a thermal or visible camera image in flight, or watch video streams of both simultaneously in picture-in-picture mode, the FLIR Duo Pro R is making it easier and faster for drone operators to capture imagery and thermal data from the air. Some of the applications for the FLIR DUO PRO include Roof, Powerline, Substation and Telephone Mast inspections, Search and Rescue, Precision Agriculture, Security and Surveying.

The Workswell WIRIS Pro is a fully radiometric thermal camera that has been specially designed for use with unmanned aerial vehicles (UAVs). The vast applications for the WIRIS Pro include but are not limited to industrial inspections, archaeology, and precision agriculture. The WIRIS Pro records a large amount of radiometric data over the course of a single inspection and as such has its own internal SSD. The WIRIS Pro comes in two storage capacities – 128 and 256 GB – and its data can be offloaded to an external USB drive or micro SD card as well.

Riegl’s VUX-1HA high accuracy kinematic LiDAR sensor is a very high speed, non-contact profile measuring system using a narrow laser beam and a fast line scanning mechanism, enabling full 360 degree beam reflection without any gaps .

Surveyor Ultra LiDAR system is suited for high speed UAV (VTOL fixed-wing or helicopter) and long-range needs due to its high-density specifications. With the 360° Field of View of the Hesai XT32M2X laser scanner, the Surveyor Ultra answers vertical mapping and mobile mapping needs when combined with Fly&Drive. Its light weight makes it easy to mount on any UAV, including VTOL or helicopters.

The Mapper UAV LiDAR system is equipped with a high-performance Livox Horizon laser scanner from Livox, a DJI-backed company. With a great point density, this LiDAR sensor allows the LiDAR system to fly easily at 70m AGL with a 120m swath.

The Mapper can be mounted quickly on any UAV and has integrations in Multirotor, Helicopter and Fixed Wings UAV. It is low weight, self powered , turn-key and simple to operate.

EDGE provides high-definition measurements both above and below the water surface and accurately measures the transition from land to water. Additionally, it provides simultaneous water and bottom surface detection at sub-centimeter accuracy and precision from shore through shallow waters.

The RIEGL VQ-840-G carries out laser range measurements for high resolution surveying of underwater topography with a narrow, visible green laser beam, emitted from a pulsed laser source. Contingent to clarity, at this particular wavelength the laser beam penetrates water enabling measurement of submerged targets.

The MicaSense RedEdge is an advanced multispectral camera specially designed for small UAVs. It has simultaneous capture of five discrete spectral bands and it’s fast capture rate enables faster flight speeds and lower flight altitudes.

Altum-PT seamlessly integrates an ultra-high resolution panchromatic imager, a new thermal imager with great ground resolution and five discrete spectral bands . Altum-PT incorporates dedicated optics, industry-leading industrial imaging sensors, and narrow band scientific grade filters.

The MicaSense RedEdge Panchromatic (RE-P) is a multispectral camera that captures calibrated, high-resolution multispectral and RGB images from a single flight for advanced analytics. The RedEdge-P integrates specially designed optics, an industrial image sensor, and narrow-band scientific grade filters to achieve pixel-aligned output at previously unattainable resolutions while maintaining efficiency and reliability.

The A7R has an updated 61MP Exmor R BSI CMOS sensor and enhanced BIONZ X image processor, which afford impressive imaging results with marked smoothness, a 15-stop dynamic range, and speed Up to 10 fps shooting along with the ability to record UHD 4K30 video, both with support for Real-time Eye AF and Tracking AF technologies.

The Corona camera has dual sensors: Solar Blind UV and visible light and is, therefore, capable of detecting and imaging corona in daylight.The camera offers on-board recording in real time of both UVc radiation and the radiating sources, providing a means to pinpoint faults and investigate corona partial discharge.

The A7R has an updated 61MP Exmor R BSI CMOS sensor and enhanced BIONZ X image processor, which afford impressive imaging results with marked smoothness, a 15-stop dynamic range, and speed Up to 10 fps shooting along with the ability to record UHD 4K30 video, both with support for Real-time Eye AF and Tracking AF technologies.